" /> Spring muffler brass adjustable muffler exhaust valve 3/8 pneumatic throttle

Brass cnc machining

We are the professional brass CNC machining parts, hot forging parts, brass pipings and brass ftting supplier. Klikkon can supply the total solution from the development & design of new products to manufacturing & assembling for diverse requirements.

Spring muffler brass adjustable muffler exhaust valve 3/8 pneumatic throttle

Spring muffler brass adjustable muffler exhaust valve 3/8 pneumatic throttle

Our factory are good at machining,sample or drawing will be welcome.

We always try to reduce the cost to increase value for customer.

Spring muffler brass adjustable muffler exhaust valve 3/8 pneumatic throttle 



Product Description

 

1Technical standard:

  • Brass threaded automatic gas safety exhaust valve
    FOLS VAVLES
    Product name 207 Brass ball valve
    manufacturerGUANGZHOU FOLS VALVES
    MaterialsBrass body/iron lever/brass core/brass ball 
    Applicable temperature-10℃-- +110 ℃
    working Pressure1.6Mpa




    Product Spec /Size
    LH
    G3/8"
    47113
    G1/2"   DN15
    47113
    G3/4"   DN20
    47113
    G1"      DN25
    47113
    图片 1

2Advantage:

 


    • Safety valve (exhaust valve)
      According to the working principle, Safety valves are divided into two types: spring type and lever type. Spring type safety valve depends on spring force, and lever type safety valve depends on gravity work of heavy hammer. According to the structure form, it can be divided into closed and non closed type. Flammable, explosive and toxic media are closed, and the use of air, steam and inert gas is not closed. According to the opening level, it is divided into full start and micro opening. The opening height of the full valve disc is 1/3~1/4 of the seat diameter. The 1/15~1/20. boiler steam system with the height of the opening valve is the diameter of the valve seat.
       Function
      The use safety valve is an automatic valve. Its function is to ensure that the boiler or other pressure equipment is not damaged by overpressure. When the pressure exceeds the take-off pressure, the valve will automatically open. After removing some gases, the valve will automatically shut down after the pressure is restored.
       
      When the working pressure is more than 0.6MPa, the starting pressure of the use of the safety valve should be 1.05~1.1 times the working pressure; when the working pressure is <0.6MPa, it should be the working pressure of 1.2~1.25 times. The setting of the take-off pressure should not be higher than the allowable pressure of the boiler or equipment, but it should not be set too low, otherwise the inertia will be released to reduce the pressure to too low to affect the normal operation. Because there is a 20% pressure difference between the jump pressure and the back seat pressure, if the pressure is set at the working pressure, the back seat pressure will not be able to meet the requirements of the use. The safety valve used in pairs should take a 0.02~0.05MPa of difference, so as to prevent two valves from taking off at the same time, making the discharge volume too large and wasting energy. The outlet diameter of the safety valve should be 1 larger than the diameter of the inlet pipe (~2), and it should be as reliable as possible. It is damaged by pressure. When the pressure exceeds the take-off pressure, the valve will automatically open. After removing some gases, the valve will automatically shut down after the pressure is restored.
       
      When the working pressure is more than 0.6MPa, the starting pressure of the use of the safety valve should be 1.05~1.1 times the working pressure; when the working pressure is <0.6MPa, it should be the working pressure of 1.2~1.25 times. The setting of the take-off pressure should not be higher than the allowable pressure of the boiler or equipment, but it should not be set too low, otherwise the inertia will be released to reduce the pressure to too low to affect the normal operation. Because there is a 20% pressure difference between the jump pressure and the back seat pressure, if the pressure is set at the working pressure, the back seat pressure will not be able to meet the requirements of the use. The safety valve used in pairs should take a 0.02~0.05MPa of difference, so as to prevent two valves from taking off at the same time, making the discharge volume too large and wasting energy. The outlet diameter of the safety valve should be 1 larger than the diameter of the inlet pipe (~2), and it should be as reliable as possible. 



图片 2


图片 3


 

 

our company

图片 7

image

 

 

Packaging & Shipping

1. Shrink bag --> 2. Small Box --> 3. Carton  -->  4. Strong Plywood Case

 

 


Application

Mechanical components for engineering and construction, machinery, vehicles, robot parts, Pipe fittings, Fasteners, Electronic components, Hardware and other metal parts.

MOQ

Negotiable

Payment Terms

T/T 30% in advance, balance before shipment.

Port of Loading

Ningbo, China

Delivery

Samples one week or so, batch production 30days at least.



 

FAQ

 

 

Q: Are you trading company or manufacturer ?
A: We are a manufacturer.

Q: How long is your delivery time?
A: Generally it is 2-10 days if the goods are in stock. or it is 20-40 days if the goods are not in stock, it is according to quantity.


Q: Do you provide samples ? is it free or extra ?
A: Yes, we could offer the sample for free charge but do not pay the cost of freight.


Q: What is your terms of payment ?
A: Payment<=1000USD, 100% in advance. Payment>=1000USD, 30% T/T in advance ,balance before shippment.


Q: Can you customize products for your customers? 
A: Yes, Customized service is one of our core business, we have no small MOQ request. 

Q:Will you do 100% inspection before Shipment? 
A: Our QC will do 100% inspection and we will take the 100% claims if defective.




     




Home| About Us| Products| News| Resources| Comments| Contact Us| Phone: +86-13634068027 | sales@klikkon.cn |